Cover

104 ISO 9001:2015    F 414 214 0450  •  P 414 214 0444  •  T 888 243 6914 IMPORTANT SAFETY INSTRUCTIONS: GLASSSAFETY: • Read the installation instructions in their entirety before installing. It is important to save these instructions. • All componentsmust be installed in accordancewith IBC2015 or per local codes as specified by the “authority having jurisdiction”. • All glassmust be temperedmonolithic or tempered laminated safety glass. • Glass selection should be in accordancewith: - ASTMC1036-16 (Standard Specification for Flat Glass – Table 4 - Dimensional Tolerances for Rectangular Shapes of Type 1 – Transparent Flat Glass) - ASTMC1172 -14 (Standard Specification for LaminatedArchitectural Flat Glass) - ASTMC1048 (Specification for Heat Strengthened and Fully Tempered Flat Glass) • For PanelGrip ® accessories and or replacement parts contact: Wagner Companies Tel: (888) 243-6914 Tel: (+1) 414-214-0444 Fax: (+1) 414-214-0450 Web: www.wagnerarchitectural.com Email: rfq@mailwagner.com RAIL SAFETY: • Check and confirmall local railing code requirements. • A structural analysismay be required per local codes. Structural analysis is the customers' responsibility. • This product must be installed in amanner consistent with its intended use. glass railing system Installation Instructions h a h 7 / 16 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " h a h 7 / 16 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " h a h 7 / 16 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " h a h 7 / 16 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " 7 / 8 " Cladding for Base Shoe Moulding 10' Lengths a h Thick. SATIN ANODIZED ALUMINUM SATIN STAINLESS TYPE 304 POLISHED STAINLESS TYPE 316 POLISHED STAINLESS TYPE 304 POLISHED BRASS ALLOY 260 7 / 8 " 4 1 / 8 " 1 / 16 " GR2802.4AN GR3802.4 GR3806.4 GR3802.7 GR4802.7 Contact Wagner for Custom Cladding for Fascia , Embed , Wedge Block and Drain Block applications. Cladding Tape 3 / 4 " × 108' Roll Pressure sensitive, high strength adhesive used for adhering Cladding and End Caps to Base Shoe Moulding. PART NUMBER Cladding Tape GR975 Cladding 3 / 4 " 1 1 / 8 " Gasket – Black, for PanelGrip For use without Cladding. Gasket 20' GR9355-20 Gasket 40' GR9355-40 Gasket 100' GR9355-100 Gasket 250' GR9355 Gasket – Black For use with Cladding only. 1 1 / 8 " Wide × 1 / 4 " High. Peel back paper to reveal self-adhesive strip. Stick onto underside of Cladding before applying Cladding to Base Shoe Moulding. Accommodates all glass sizes. GLASS OVER .460 " Gasket 20' GR9302-20 Gasket 40' GR9302-40 Gasket 100' GR9302-100 Gasket 500' GR9302 Base Shoe Moulding End Caps – Formed from Sheet These End Caps are for use when Base Shoe Moulding uses Cladding and Cladding Tape results in widening the overall width of the base by 1 / 8 " – 1 / 16 " on each side. Width Height SATIN ALUMINUM SATIN ANODIZED ALUMINUM SATIN STAINLESS POLISHED STAINLESS POLISHED BRASS ALLOY 260 2 5 / 8 " 4 1 / 8 " GR2852EC.4 GR2852EC.4AN GR3852EC.4 GR3852EC.7 GR4852EC.7 2 7 / 8 " 4 1 / 8 " GR2876EC.4 GR2876EC.4AN GR3876EC.4 GR3876EC.7 GR4876EC.7 End Caps Formed From Sheet Base Shoe Moulding Cladding

RkJQdWJsaXNoZXIy NjA3MjE=