|
|
 |
 |
Wagnerail
|
 |
| |
| WAGNERAIL™ |
All-Aluminum Level and Ramp Railing System |
|
Heavy cast aluminum fittings with a tumbled finish and aluminum pipe - the strength of welding railing in a mechanical, no-weld system.
Wagnerail™ is a simple, slip-together, mechanical railing system requiring no welding for fabrication. Connealed set screws securely lock rails and fittings where required. This high-strength, yet lightweight, mechanical system meets all accepted engineering practices and complies with OSHA regulations when properly specified and assembled.
All pipe components and accessories are available for fabrication and installation by qualified local contractors. Installation and finish are the responsibility of the qualified contractor you select in your area. Wagnerail™ will be furnished to meet the specifications of your working drawings for precision alignment and embedment on the level or on the rake as installed by your contractor Wagnerail™ may be assembled using a screw to be drilled and tapped into the fitting or 2-part epoxy. |
| Cast Aluminum slip-on fitting for 1-1/2" schedule 40 aluminum pipe. |
| FEATURES |
- Stainless steel fasteners
- Fabrication is as easy as cutting pipe and drilling holes
- Installation using grout or anchor bolts
- Pre-finished or mill
|
| Aluminum Pipe Alloy 6063-T6 Schedule 40 20' Lengths |
|
|
Pipe Size |
OD |
ID |
t |
lb/ft |
Aluminum |
|
1-1/2" |
1.900" |
1.610" |
.145" |
.940" |
P540 | |
|
|
|
| CAST ALUMINUM FITTINGS |
|
|
|
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
910 | |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
911 | |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
914 | | |
| CROSS |
5° CROSS |
5° BASE WDGE | |
|
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
912 | |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
913 | |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
915 | | |
| WAGNERAIL™ BALL STYLE FITTINGS |
|
| Cast Aluminum Fittings with a Tumbled Finish and set scres. |
| Ball style railing fittings are very popular during the late 19th and early 20th centuries. Over the years, they have gone out of use but are still commonly seen along the ocean and in older facilities. In recent years, Wagner has received requests for those parts as many municipalities are restoring some of these existing installations or for new constuction in historic renovations. Wagner is pleased to re-introduce these parts in cast aluminum for use with 1-1/2" aluminum pipe. |
 | |
|
| ELBOW |
SINGLE OUTLET |
|
|
|
|
| Includes two 3/8"-16 set screws |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR210 | | |
|
|
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR260 | | |
| TEE |
PARALLEL OUTLET |
|
|
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR220 | | |
|
|
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR270 | | |
| CROSS |
ADAPTER |
|
|
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR230 | | |
 This adapter may be used with the Single and Parallel Outlets to create varing ramp and stair angles. |
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR250 | |
|
|
| FLANGE |
|
 |
|
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
WR240 | | |
|
| EXTRUDED HANDRAIL BRANKETS |
| Saddle fits 1.50" thru 3.00" OD and flat surfaces. Contact Wagner for different widths and hol cifigurations. |
New Extruded Handrail Bracket meets codes requiring a 1-1/2" minimum clearance between the handrail and the wall and the underside of the handrail and horizontal bracket arm. |
 |
Aluminum 6063 Anodized Aluminum AA-M10-C22-A41 | |
 |
Aluminum 6063 Anodized Aluminum AA-M10-C22-A41 | |
|
c |
Aluminum |
Anodized Aluminum |
|
2-1/2" |
ER8101 |
ER8101A |
|
3" |
ER8001 |
ER8001A | | |
|
c |
Aluminum |
Anodized Aluminum |
|
2-1/2" |
ER8103 |
ER8103A |
|
3" |
ER8003 |
ER8003A | |
| LONG LENGTH SHAPE |
c |
Mill Finish Aluminum |
lb/ft |
| This extuded handrail shap is also available in 5' lengths with no holes. |
2-1/2" |
BER8101 |
2.50 |
|
3" |
BER8001 |
2.50 | |
| LONG LENGTH SHAPE |
c |
Mill Finish Aluminum |
lb/ft |
| This extuded handrail shap is also available in 5' lengths with no holes. |
2-1/2" |
BER8103 |
2.50 |
|
3" |
BER8003 |
2.50 | |
 |
Aluminum 6063 Anodized Aluminum AA-M10-C22-A41 | |
 |
Aluminum 6063 Anodized Aluminum AA-M10-C22-A41 | |
|
c |
Aluminum |
Anodized Aluminum |
|
2-1/2" |
ER8102 |
ER8102A |
|
3" |
ER8002 |
ER8002A | |
|
c |
Aluminum |
Anodized Aluminum |
|
2-1/2" |
ER8104 |
ER8104A |
|
3" |
ER8004 |
ER8004A | |
| DRIVE-ON END CAPS |
SINGLE-LOCK SPLICE LOCK
Use as Connectors or Expansion Joints |
|
|
|
|
Pipe Size |
Tube OD |
Aluminum |
Anodized Aluminum |
|
1-1/2" |
1.900" |
3232AM |
3232AM.AN | |
|
Length |
Aluminum |
Stainless |
Screw |
|
3-3/4" |
3319 |
3321 |
3/8" x 1-3/8" |
|
6" |
3345 |
3349 |
3/8" x 1-3/8" | |
|
|
 |
|
 |
|
|
| Installation and finish are the responsibility of the qualified contractor you select in your area. Wagnerail™ will be furnished to meed the specifications of you working drawings for precision alignment and embedment on the level or on a slope as installed by your contrator. Wagnerail™ may be assembled using mechanical fasteners (drilling and tapping the material for screws) or with a two-part structural epoxy. |
- Stronger than existing mechanical systems.
- Heavy-walled, but lightweight cast aluminum fittings.
- Elbows are bent from matching aluminum pipe.
|
|
|
| LEVEL RAIL END |
5° RAMP RAIL END |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
916 | |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
917 | |
|
|
|
|
|
| 90° ELBOW |
WALL RETURN |
|
Pipe Size |
Tube OD |
Aluminum |
|
1-1/2" |
1.900" |
365-7 | |
|
Pipe Size |
Tube OD |
c |
Aluminum |
|
1-1/2" |
1.900" |
2-1/2" |
1139-1 |
|
1-1/2" |
1.900" |
3" |
1142-1 | |
|
|
|
|