Request a Quote
Wagner Companies

Lumenrail Brackets
  • Designed for use with Wagner Slotted Cap Rail sections.
  • No welding or special tools.
  • Unique expansion connector – patent pending – is inserted
    into the Cap Rail slot. Once the two set screws are fully tightened, the bracket is locked into place
WALL MOUNT BRACKETS Wall Mount Bracket Installation:
Stainless Steel bracket arms are hollow and may be used as an alternate wireway. Aluminum bracket arms are solid.
a
Satin Aluminum
Use With
Satin Stainless's
Use With
1"
LU203
GR2166
LU201
GR3166
1-1/4"
LU202
GR2190
LU200
GR3190
Matching Wall Bracket with standard mounting saddle for non-illuminated, pipe railing. Refer to page 151.
LU207
LU206

 
  1. Mark the location of the wall mount brackets on your wall.
  2. Use screws to fasten the wall mount bracket mounting plate to wood blocking or wall studs. Otherwise, use appropriate fasteners as determined by your particular mounting condition – i.e. hollow wall fasteners or masonry anchors.
  3. Loosely fasten the brackets to the wall.
  4. Place the Cap Rail on the wall mount expansion bracket and adjust the brackets to the wall. Prior to securing, verify the fit of all joints and seams.
  5. Once all joints and dimensions have been confirmed, tighten all screws.
  6. Move Snap-On Cover into position and apply pressure to the flange to lock it onto the wall bracket mounting plate.
POST MOUNT BRACKETS
Satin Finish
a
b
Pipe Post Size
Corner Bracket
Adjustable Bracket
Post Bracket
Aluminum
1-1/4"
1.50"
1-1/2" Sch. 80
LU334
LU332
LU330
Stainless
1"
1.37"
1-1/4" Sch. 40
LU325
LU323
LU321
Stainless
1-1/4"
1.60"
1-1/2" Sch. 40
LU324
LU322
LU320
Refer to page 150 for Post Mount Brackets with a standard mounting saddle for non-illuminated pipe railing.
  1. Dry assemble all components to confirm fit and dimensions prior to final assembly.
  2. For adhesive connection to the post:
    1. Apply adhesive to the inside wall of the top of the post.
    2. Insert the Post Brackets into the posts.
    3. Confirm alignment by setting Cap Rail into place before adhesive sets.
  3. For set screw connection to the post:
    1. Drill and thread a 1/4"-20 hole 5/8" to center from the top of the post.
    2. Insert the Post Bracket into the post.
    3. Set Cap Rail into place to confirm alignment.
    4. Use the 1/4"-20 set screw – provided – to lock the Post Bracket into place.
  4. Once Cap Rail is in place, confirm alignment and tighten the two set screws on the underside of the expansion connector.