Wagner Companies

Slotted Cap Rail Elbows

PROTECTIVE INSERT HORIZONTAL MITER ELBOWS
a
b
c
Length
PVC
3/8"
3/4"
1"
5'
GR9396-5
1/2"
3/4"
1"
5'
GR9397-5
1/2"
3/4"
1-1/4"
5'
GR9394-5

These inserts are used to adapt the 3Form ecoresin™ Glass and Archimesh™ panels to sit within the Slotted Tube opening.
SLOTTED TUBE INSERT
This insert is useful in closing up gaps between Light Sticks, Brackets and Mounting Clips within the Cap Rail slot. Apply silicone sealant/adhesive to interior of channel on slotted Cap Rail and insert as required.
 
Part Number
Neoprene, Black
LU001
Neoprene, Gray
LU001G
Available in one foot increments.
a
b
Satin Finish Aluminum
Satin Finish Stainless
1.66"
6"
GR2166MK.4
GR3166MK.4
1.90"
6"
GR2190MK.4
GR3190MK.4
Use with Internal Splice and Epoxy Adhesive - see page 12.
END CAPS VERTICAL MITER ELBOWS
16 Ga. Thickness
Use Epoxy for attachment - see page 12.
OD
Satin Finish Aluminum
Satin Finish Stainless
1.66"
GR2166EM
GR3166EM
1.90"
GR2190EM
GR3190EM
INTERNAL SPLICE
This internal connector is used to splice Slotted Cap Rail sections.
Produced from extruded aluminum for use with Aluminum or Stainless Steel Cap Rails. 4" in length.
Use Epoxy for attachment - see page 12.
a
Use With .109" Thick Aluminum
Use With .059" Thick Stainless
1.66"
GR2166S
GR3166S
1.90"
GR2190S
GR3190S
Satin Finish
Use with Internal Splice and Epoxy Adhesive.
a
b
Aluminum
Stainless
1.66"
6"
GR2166MKV.4
GR3166MKV.4
1.90"
6"
GR2190MKV.4
GR3190MKV.4
For Custom Miter Elbows, provide Wagner with Slotted Tube diameter; angles c and d and tangent length b.