Panel Mounting Clips

PANEL CLIPS

This selection of Panel Clips is used in the installation of railing infill panels. Panel Clips are available for use with 1/4", 3/8" or 1/2" glass, mesh or solid panels. When used in a vertical mount, provide holes to match up with the security pins on the Panel Clips below to keep the glass or panel from sliding down over time.

GLASSGRIP™ GlassGrip™ is perfect for all guardrail applications requiring a 1/4" infill panel – stainless steel GlassGrips include a second set of screws for use with 3/8" glass. The GlassGrip tightening system utilizes solid rubber O-rings that hold the glass panels as they securely grip and prevent sliding. The optional support pin fits through a pre-drilled hole in the glass for added support. Mounting hardware is not included. Brass and Stainless Steel GlassGrips may be used with 1/4" or 3/8" glass using the screws that are provided. Use With: Polished Brass Satin Stainless Polished Stainless 1.900" or 2.000" OD 142816-2 152816-2 162816-2 Flat 142816-F 152816-F 162816-F

GLASS CLAMP GLASS CLAMP Gaskets supplied to permit use with 3/8" or 1/2" glass or panel. Mounting Screw - M8 x 1.25" - included. For 1/2" glass or panel. Mounting hardware not included. Use with: Satin Stainless Polished Stainless 1.900" or 2.000" OD GR320R.4 GR320R.7 Flat GR320F.4 GR320F.7 Use with: Satin Stainless Polished Stainless 1.900" or 2.000" OD 152813R-2 162813R-2 Flat 152813R-F 162813R-F

HOLE SPECIFICATIONS FOR GLASS

Per ASTM C 1048, this chart should be used to determine minimum size and placement for tempered and heat strengthened glass. (t) Glass Thickness 1/4" 3/8" 1/2" (A) Minimum diameter of holes 5/16" 7/16" 9/16" (B) Edge of hole to edge of glass 1/2" 3/4" 1" (C) Distance between rims of holes 1/2" 3/4" 1" (E) Distance from Corner to rim of holes 1-5/8" 2-7/16" 3-1/4" (F) Minimum fillet radius 1/4" 3/8" 1/2" Note: When using tempered glass, holes must be drilled prior to tempering