|
|
|
Invisiware® Radius Ferrules
|
- Stainless Steel, Type 316
- Must be swaged onto only one end of the cable.
- Available pre-swaged with pre-cut cable. Contact Wagner with your cable run requirements for pricing.
- See Tools if you wish to do your own swaging.
- Not an adjuster, Use Invisiware® Receiver or Adjust-A-Jaw Tensioner® for adjusting tension.
|
For use on the fixed, non-tensioning end of the cable, often in combination with the Invisiware® Receiver on the tensioning end. When installed, the fitting is hidden inside the end post with only the head exposed on the outside of the end post. Externally, it looks the same as the Invisiware® Receiver, but costs much less.
Pipe ends are counterbored so the full perimeter of the head of the Radius Ferrule will rest on a flat surface in the pipe. The head rests on the outside wall of a flat-sided post. A plastic washer is included and acts as a scratch resistant barrier between the Radius Ferrule head and the post.
For pipe and square tube railing only. The Radius Ferrule should not be used on rectangular, double post construction. |
|
Cable Size |
L* |
D* |
S |
A |
Stainless Steel |
1/8" |
.750" |
.250" |
.537" |
.437" |
CRRF4 |
3/16" |
.750" |
.250" |
.537" |
.437" |
CRRF6 |
1/4" |
1.000" |
.375" |
.646" |
.531" |
CRRF8 |
5/16" |
1.000" |
.500" |
.865" |
.687" |
CRRF10 |
3/8" |
1.000" |
.500" |
.865" |
.687" |
CRRF12 |
* After Swaging
|
|
|
|
|
|
|