|
|
|
|
|
Regency Series Forged Iron Panels
Single Panel Assemblies
Produced from 3/8" X 1" solid bar, except as noted. |
- Level Railings: Use Series RR20A, RR20D or RR20F panels
- Up to 48 degrees: Use Series RR20B, RR20C, RR20D or RR20F panels
- Curved panels are suitable for 2'-6" to 20'-0" radii
- Comply with 4" sphere code limitation.
|
|
|
|
The designs included within this collection were developed to be installed directly into a closed stringer staircase with a wooden handrail or between a traditional metal framework with your choice of handrails. Regency Railings components are not designed to be installed directly onto stair treads.
Wagner does not provide a finished product. Most components are shipped primed black and the finish is then applied after fabricating into a railing. You can choose to apply a paint, powder coated or faux finish
|
|
|
|
|
Measurements are approximate.
Please select carefully, since panels within a design group may be very similar. Panels supplied with a flat black primer. See photo for typical surface finish.
Regency Railings panels and balusters cannot be sandblasted.
S Utility Patent #5,820,111 and 6,059,269 Canada Patent #2327280.
|
|
|
|
|
|
|
| 3/4" x 1" flat and 1/2" square bar |
3/4" x 1" flat and 1/2" square bar. Curved panels to the left are made from this panel. |
| RR20TL |
RR20TR |
|
30°Angle:
Wooden handrail, 30-1/2" baluster space
and 4" closed vertical stringer. |
Balcony Rail:
Wooden handrail, 30-1/2" baluster space and 4" closed vertical stringer |
|
|
|
|
|
|