Wagner Companies

Rebecca Series Forged Iron Panels

images/logotiny.gif (4407 bytes)

Rebecca Series Forged Iron Panels
Single Panel Assemblies
Produced from 1/2" solid round bar

  • Level Railings: Use Series RR50A panels
  • For 25 to 39 degrees: Use Series RR50B
  • For 40 to 52 degree: RR50C panels
  • Curved panels are suitable for 2'-6" to 20'-0" radii
  • Comply with 4" sphere code limitation.

The designs included within this collection were developed to be installed directly into a closed stringer staircase with a wooden handrail or between a traditional metal framework with your choice of handrails. Regency Railings components are not designed to be installed directly onto stair treads.

Wagner does not provide a finished product. Most components are shipped primed black and the finish is then applied after fabricating into a railing. You can choose to apply a paint, powder coated or faux finish

Measurements are approximate.
Please select carefully, since panels within a design group may be very similar.
Panels are supplied with a flat black primer and need to be properly finished before installation
US Utility Patent #5,820,111 and 6,059,269 Canada Patent #2327280.
Terminal - 3/4" round bar with 1" round tube. Curved panels are formed from flat panel shown.

35° Angle:
Wooden handrail, 30" baluster space and 4" closed vertical stringer.

40° Angle:
Wooden handrail, 30-1/2" baluster space and 4" closed vertical stringer.
Shown with FB6413. Click here for other Forged Balusters.

Balcony Rail (Series A Panels):
Wooden handrail, 36-1/2" baluster space and 4" closed vertical stringer.