| Coped Drive-On Connectors |
|
COPED DRIVE-ON CONNECTORS |
SIDE OUTLET TEE - TYPE C |
No More Pipe Coping or Notching Necessary
Simple to use and weld on, these money-saving connectors are used with pipe sections to form a railing system. Unique drive-on and weld design eliminates pipe coping and saves time spent on cutting and alignment.
Use Type A connectors for ramps. 32º Type B bevel tees may be used for 30º to 32º slopes; 36º Type D bevel tees may be used for 36º to 40º slopes; and 45º Type E bevel tees may be used for 42º to 48º slopes.
For 11/4", 11/2" and 2" nominal pipe. These connectors are supplied with a mill finish.
|
|
|
Pipe Size |
Tube OD |
Sch. 40 Steel |
Sch. 40 Aluminum |
|
1-1/4" |
1.660" |
1830 |
|
|
1-1/2" |
1.900" |
1842 |
1844 | |
|
90° TEE CONNECTOR - TYPE A |
90° TEE CONNECTOR - TYPE H |
|
|
|
|
Pipe Size |
Tube OD |
Sch. 10 Steel |
Sch. 40 Steel |
Sch. 40 Aluminum |
Sch. 40 Stainless |
|
1-1/4" |
1.660" |
1822-L |
1822 |
1823 |
1822S |
|
1-1/2" |
1.900" |
1834-L |
1834 |
1835 |
1834S |
|
2" |
2.375" |
|
1896 |
1906 |
1916 | |
|
Pipe Size |
Tube OD |
Steel |
Aluminum |
Stainless |
|
1-1/4" |
1.660" |
3535 |
1911 |
1921 |
|
1-1/2" |
1.900" |
3540 |
1912 |
1922 |
|
2" |
2.375" |
1902 |
1913 |
1923 | |
| Corner Tee - Type B |
Bevel Tee - Types D, E and F |
|
|
|
|
Pipe Size |
Tube OD |
Sch. 40 Steel |
Sch. 40 Aluminum |
|
1-1/4" |
1.660" |
1826 |
1827 |
|
1-1/2" |
1.900" |
1838 |
1839 | |
|
Pipe Size |
Tube OD |
Bevel |
Sch. 40 Steel |
Sch. 40 Aluminum |
|
1-1/4" |
1.660" |
32° |
1873 |
|
|
1-1/4" |
1.660" |
36° |
1870 |
1871 |
|
1-1/4" |
1.660" |
45° |
1872 |
|
|
1-1/2" |
1.900" |
32° |
1883 |
|
|
1-1/2" |
1.900" |
36° |
1880 |
1881 |
|
1-1/2" |
1.900" |
45° |
1882 |
| |
Grind or Supply As Is For Guard Rail |
To Use: |
Dimensions to Center Line
| Pipe Size |
90°
a |
32°
b |
32°
c |
36°
b |
36°
c |
45°
b |
45°
c |
| 1-1/4" |
1.00" |
2.31" |
1.96" |
2.56" |
2.07" |
2.31" |
1.63" |
| 1-1/2" |
1.12" |
2.69" |
2.28" |
2.69" |
2.18" |
2.69" |
1.90" |
| 2" |
1.31" |
|
|
|
|
|
| |
 |
- Cut pipe to required
length.
- Remove burr.
- Drive on coped connector.
To drive on 90º coped
welding connectors into
the end of the pipe, place
a bar into the coped end
and hammer connector
down tight. For bevel connectors,
insert into the
pipe end, place round
steel plug into connector
and drive on tight.
- Weld and grind smooth.
For current information regarding the Americans with Disabilities Act Accessibility Guidelines, Click here.. | |
|
|
|
|